B.I.C Tinning Flux
This Light yellow coloured Acidic Liquid flux is used in Tinned Copper wire manufacturing or solid copper
metals. This flux can be diluted with Low TDS water as per application and its residues can be removed
with hot water.
- Tinning Solder Flux can be used in dipping, spraying, brushing, swabbing, and many other fluxing
operations. For spraying, Solder Flux is ready to use directly from its container, no thinning required.
When spray fluxing, it is imperative that proper flux coverage and uniformity be achieved and
maintained. A dry flux coating of 500 to 1500 micrograms per square inch is recommended as a starting
point.
- When nitrogen sealed wave solder equipment is used, it is generally necessary to apply slightly more
flux than normal as a result of excess drying due to the extended length of the equipment.